608-831-2396 or 866-352-7108

HP Color LaserJet M553  fuser installation instructions

purchase here

Installing the fuser.

Turn the printer off and unplug the power cord. The fuser might be hot if you have been using the printer. As a safety precaution wait 20 minutes for the fuser to cool before proceeding.

Open the right side cover (see picture below).

The fuser assembly has two blue handles with squeezable release triggers; insert your fingers into the handles and squeeze and hold the triggers to release the fuser.

While squeezing the triggers, gently pull the fuser out towards you and remove it from the machine.

Install the new fuser in the reverse manner; make sure it is seated well, and then close the door.  In the next step you will reset the fuser page count.

That's it for the fuser! Remember to send your old fuser back to us if you purchased your maintenance kit on exchange. Ship it back in the box we sent if you still have it.

 

Other Steps in HP LaserJet M553

  1. HP Color LaserJet M553 fuser installation instructions
  2. HP Color LaserJet M553 reset fuser page count instructions