• Email

HP Color LaserJet 4600 fuser installation instructions

Installing the fuser.

Turn the printer off and unplug the power cord. The fuser might be hot if you have been using the printer. As a safety precaution wait 20 minutes for the fuser to cool before proceeding.

Open the top cover.

Two blue thumb screws hold the fuser in place; loosen these screws.

Grasp the fuser on either side with two hands, and lift straight up and away.

Install the new fuser in the same manner; make sure it is seated well, and then tighten the blue thumb screws.

That's it for the fuser! Remember to send your fuser back to us if you purchased your maintenance kit on exchange. Ship it back in the box we sent if you still have it.

• Next