Remove the left side cover:
1. Pull out on the notch at the back of the left side cover (shown near callout 1 in picture below).
2. Rotate the left side cover away from the printer.
Remove the back cover:
1. Fold open the straight-through output door located at the back of the machine.
2. Remove two screws from the back of the printer (shown as callout 1 in picture below).
3. Press down and hold the two release levers (see callout 2 in picture below) and pull the back cover off of the printer.
Next remove the right side cover:
1. Open the toner cartridge door.
2. Remove one screw on the back of the printer (circled in callout 1 of picture below).
3. Lift the right side of the printer and release the tab on the bottom of the right side cover (shown as callout 2 in picture below).
4. While continuing to press the release tab, grasp the top of the cover and rotate it away from the printer, as shown below.
Continued . . .
|
To
check prices or purchase an HP LaserJet 1300 maintenance kit 
