Printertechs.com, Inc. refurbished HP laserjets, laser printer parts and accessoriesrefurbished HP printers and laserjet  parts

HP LaserJet 4000 and 4050 Maintenance Kit Installation Instructions C4118-67909

** Note: LaserJets 4000 and 4050 series printers use the same maintenance kit. **
HP's part number for a 4000 / 4050 maintenance kit: C4118-67909 (also C4118-69001) - Note: HP's kit does not include a separation pad (ours does).

 Purchasing Information
To check prices or purchase an HP Laserjet 4000 / 4050 maintenance kit click here, or call us toll free at 866-352-7108.

For HP LaserJets 4000 and 4050 series printers, Hewlett Packard recommends the installation of a maintenance kit after every 200,000 pages printed. This is a rough estimate and you may need to install a maintenance kit far sooner than that depending on printing conditions and if the printer has been previously serviced with low quality aftermarket parts.

 

A picture is worth a thousand words...

It's a lot easier to show somebody how to install a maintenance kit than to tell them. After talking with hundreds of customers over the phone about installing printer maintenance kits we decided to write our own manuals. The instructions we found from Hewlett Packard and other sources were missing lots of information and often didn't contain any pictures. So here you are! We hope you find the installation instructions helpful. A lot of time went into creating them, feel free to email us with your comments!

 
Contents
  1. What is included in a LaserJet 4000 / 4050 maintenance kit?
  2. Fuser installation.
  3. Transfer roller installation.
  4. Tray 1 (Multi-purpose tray) pick-up roller.
  5. Tray 1 (Multi-purpose tray) separation pad - part 1.
  6. Tray 1 (Multi-purpose tray) separation pad - part 2.
  7. Separation rollers and feed rollers.
  8. Reset the maintenance count.
  9. D-shaped pickup roller replacement. (extended kit only)
 
 What is included in a LaserJet 4000 / 4050 maintenance kit?
 
Qty. Description
1 HP LaserJet 4000 fuser
1 Transfer roller
6 Feed/Separation rollers
1 Tray 1 (Multi-purpose tray) pick-up roller
1 Tray 1 (Multi-purpose tray) separation pad OEM (Most of our competitors, HP included, do not include this part in their maintenance kits.)

 
 Images
 
  Description Qty in kit
HP LaserJet 4000 fuser -- click image to enlarge
1
Transfer roller OEM -- click image to enlarge
1
Feed/Separation rollers OEM
6
Tray 1 (Multi-purpose tray) pick-up roller OEM
1

Tray 1 (Multi-purpose tray) separation pad OEM

Most companies, including Hewlett Packard do not include this part (but they should).

1
Products
Refurbished LaserJets
HP Maintenance Kits
Lexmark Maintenance Kits
Toner cartridges
Transfer Kits
Paper trays and cassettes
Duplexers
Envelope feeders
JetDirect Cards
Cables
Common Parts

Tech Support
Main Support Page
Maintenance kit
Instructions
Manuals & Drivers
Print Defects
Repetitive defects Ruler
Error Codes
Service Mode
Clear Maint Count
Cold Reset Instr.

Tech Support Forum
Discussion Board

Green Initiative
Saves money, jobs, the environment.

 

 

Click to verify BBB accreditation and to see a BBB report.

 

     
608-831-2396
Home | Forum | Tech Support | About Us | Legal | Contact Us
 
© 2009 Printertechs.com, Inc.