Printertechs.com, Inc. refurbished HP laserjets, laser printer parts and accessoriesrefurbished HP printers and laserjet  parts

HP LaserJet 4100 Maintenance Kit Installation Instructions C8057-69002

HP part numbers for a 4100 maintenance kit: C8057-67901, C8057-69002, C8057-67903 - Note: HP's kit does not include a separation pad (ours does).

 To check prices or purchase an HP LaserJet 4100 maintenance kit click here or call us toll free 866-352-7108.


For HP LaserJets 4100 series printers, Hewlett Packard recommends the installation of a maintenance kit after every 200,000 pages printed. This is a rough estimate and you may need to install a maintenance kit far sooner than that depending on printing conditions and if the printer has been previously serviced with low quality aftermarket parts.

 

A picture is worth a thousand words...

It's a lot easier to show somebody how to install a maintenance kit than to tell them. After talking with hundreds of customers over the phone about installing printer maintenance kits we decided to write our own manuals. The instructions we found from Hewlett Packard and other sources were missing lots of information and often didn't contain any pictures. So here you are! We hope you find the installation instructions helpful. A lot of time went into creating them, feel free to email us with your comments!

 
Contents
  1. What is included in a LaserJet 4100 maintenance kit?
  2. Fuser installation.
  3. Transfer roller installation.
  4. Tray 1 (Multi-purpose tray) pick-up roller.
  5. Tray 1 (Multi-purpose tray) separation pad - part 1.
  6. Tray 1 (Multi-purpose tray) separation pad - part 2.
  7. Separation rollers and feed rollers.
  8. Reset the maintenance count.
 
 What is included in a LaserJet 4100 maintenance kit?
 
Qty. Description
1 HP LaserJet 4100 fuser (RG5-5063)
1 Transfer roller (RG5-4283)
4 Feed/Separation rollers (RF5-3114)
1 Tray 1 (Multi-purpose tray) pick-up roller (RG5-3718)
1 Tray 1 (Multi-purpose tray) separation pad OEM (RG5-5281) (Most of our competitors, HP included, do not include this part in their maintenance kits. This pad should be replaced!)
8 -- Bonus parts -- Cassette tray pickup rollers RB1-8865

 
 Images
 
  Description Qty in kit
HP LaserJet 4100 fuser (RG5-5063)
1
Transfer roller (RG5-4283) -- click image to enlarge
1
Feed/Separation rollers (RF5-3114)
4
Tray 1 (Multi-purpose tray) pick-up roller
(RG5-3718)
1

Tray 1 (Multi-purpose tray) separation pad
(RG5-5281)

Most companies, including Hewlett Packard do not include this part, but they should. It's like replacing the tires on a car, but only replacing the left side..

1

--- Bonus parts! ---

Cassette tray Pickup roller (RB1-8865)

8
Products
Refurbished LaserJets
HP Maintenance Kits
Lexmark Maintenance Kits
Toner cartridges
Transfer Kits
Paper trays and cassettes
Duplexers
Envelope feeders
JetDirect Cards
Cables
Common Parts

Tech Support
Main Support Page
Maintenance kit
Instructions
Manuals & Drivers
Print Defects
Repetitive defects Ruler
Error Codes
Service Mode
Clear Maint Count
Cold Reset Instr.

Tech Support Forum
Discussion Board

Green Initiative
Saves money, jobs, the environment.

 

 

Click to verify BBB accreditation and to see a BBB report.
A+ Rating!

 

     
608-831-2396
Home | Forum | Tech Support | About Us | Legal | Contact Us
 
© 2010 Printertechs.com, Inc.