Printertechs.com, Inc. refurbished HP laserjets, laser printer parts and accessoriesrefurbished HP printers and laserjet  parts

HP Laserjet 4V & 4MV Maintenance Kit Installation - Tray 1 pick-up roller & separation pad

 

 To check prices or purchase an HP LaserJet 4V / 4MV maintenance kit click here, or call us toll free at 866-352-7108.

 Replacing the pick-up roller and separation pad.

Remove the pickup roller by pinching its tab and sliding it away to the left. Replace with the new roller, sliding it onto the bar until it locks in place.

Next take a small flat head screwdriver and pry the separation pad up and loose.

Transfer the springs from the old pad onto the new pad for re-use.

The metal edge of the separation pad should face you when you're re-installing (see picture below). Press firmly on the new pad when installing until it clicks and locks in place.


Contents
  1. What is included in a Printertechs Laserjet 4V/4MV maintenance kit?
  2. Fuser installation.
  3. Transfer roller installation.
  4. Tray 1 (Multi-purpose tray) pick-up roller and separation pad.
  5. Cassette pick-up rollers - part 1.
  6. Cassette pick-up rollers - part 2.
  7. Cassette pick-up rollers - part 3.

 

Products
Refurbished LaserJets
HP Maintenance Kits
Lexmark Maintenance Kits
Toner cartridges
Transfer Kits
Paper trays and cassettes
Duplexers
Envelope feeders
JetDirect Cards
Cables
Common Parts

Tech Support
Main Support Page
Maintenance kit
Instructions
Manuals & Drivers
Print Defects
Repetitive defects Ruler
Error Codes
Service Mode
Clear Maint Count
Cold Reset Instr.

Tech Support Forum
Discussion Board

Green Initiative
Saves money, jobs, the environment.

 

 

Click to verify BBB accreditation and to see a BBB report.
A+ Rating!

 

     
608-831-2396
Home | Forum | Tech Support | About Us | Legal | Contact Us
 
© 2010 Printertechs.com, Inc.