Printertechs.com, Inc. refurbished HP laserjets, laser printer parts and accessoriesrefurbished HP printers and laserjet  parts

HP Laserjet 4V& 4MV Maintenance Kit Installation - Changing the Rubber on the Cassette Rollers - part 1

 

 Purchasing Information
To check prices or purchase an HP LaserJet 4V / 4MV maintenance kit click here, or call us toll free at 866-352-7108.

Limited supply of Brand New Genuine HP fusers now available.


 Getting at the rollers.
Remove the toner cartridge if it hasn't already been removed. Next you will remove the black Toner Guide plate. You will need to use a short, stubby screwdriver to remove the screws holding this black plate in place.

With both screws removed, the black plate can now be removed. It is wedged fairly tightly in place so it will take some wiggling and probably some steady force to get it up and out.

Remove the two screws (shown below circled in red) to free the cassette roller bar.

Continued. . .

Contents
  1. What is included in a Printertechs Laserjet 4V/4MV maintenance kit?
  2. Fuser installation.
  3. Transfer roller installation.
  4. Tray 1 (Multi-purpose tray) pick-up roller and separation pad.
  5. Cassette pick-up rollers - part 1.
  6. Cassette pick-up rollers - part 2.
  7. Cassette pick-up rollers - part 3.

 

Products
Refurbished LaserJets
Maintenance Kits
Toner cartridges
Transfer Kits
Paper trays and cassettes
Duplexers
Envelope feeders
JetDirect Cards
Cables

Employment
Jobs

Tech Support
Main Support Page
Maintenance kit
Instructions
Manuals & Drivers
Print Defects
Repetitive defects Ruler
Error Codes
Service Mode
Clear Maint Count
Cold Reset Instr.

Tech Support Forum
Discussion Board

 

 

We buy fuser cores!
We are looking for used fusers. Click here for info.


 

 

 

     
608-831-2396
Home | Forum | Tech Support | About Us | Legal | Contact Us
 
© 2008 Printertechs.com, Inc.