HP LaserJet 5, 5N, 5M Maintenance Kit Installation Instructions C3916-69001

** Note: HP LaserJets 5, 5N, and 5M use the same maintenance kit. Also the maintenance kit installation procedures are identical for the LaserJet 4, 4M, 4 Plus, 4M Plus, 5, 5M, 5N. **

Alternate kit part number: C3916-67912

 To purchase an HP LaserJet 5 maintenance kit click here.

For HP LaserJets 5 series printers, Hewlett Packard recommends the installation of a maintenance kit after every 150,000 pages printed. This is a rough estimate and you may need to install a maintenance kit far sooner than that depending on printing conditions and if the printer has been previously serviced with low quality aftermarket parts.

A picture is worth a thousand words...

It's a lot easier to show somebody how to install a maintenance kit than to tell them. After talking with hundreds of customers over the phone about installing printer maintenance kits we decided to write our own manuals. The instructions we found from Hewlett Packard and other sources were missing lots of information and often didn't contain any pictures. So here you are! We hope you find the installation instructions helpful. A lot of time went into creating them, feel free to email us with your comments!

1. What is included in a LaserJet 5 maintenance kit?
2. Fuser installation.
3. Transfer roller installation.
4. Tray 1 (Multi-purpose tray) pick-up roller.
5. Tray 1 (Multi-purpose tray) separation pad.
6. Cassette pick-up roller.
7. Optional lower cassette pick-up roller.

Pickup roller for 500 sheet optional lower cassette OEM
(RB1-2650)