HP 8100 and 8150 Series Maintenance Kit Installation Instructions C3914-69001

** Note: HP Laserjets 8100, 8100N, 8100DN, 8150, 8150N, 8150DN use the same maintenance kit. Also the maintenance kit installation procedures are identical for the laserjet 5si series, 8000 series, 8100 series, and 8150 series printers (but the part numbers are different in the 8100/8150 kit vs. the 5si/8000 kit). **

 To check prices or purchase an HP Laserjet 8100 / 8150 maintenance kit click here.

Alternate kit part number: C3914-67902

For HP laserjets 8000 and 8150 series printers, Hewlett Packard recommends the installation of a maintenance kit after every 350,000 pages printed. This is a rough estimate and you may need to install a maintenance kit far sooner than that depending on printing conditions and if the printer has been previously serviced with low quality aftermarket parts.

A picture is worth a thousand words...

It's a lot easier to show somebody how to install a maintenance kit than to tell them. After talking with hundreds of customers over the phone about installing printer maintenance kits we decided to write our own manuals. The instructions we found from Hewlett Packard and other sources were missing lots of information and often didn't contain any pictures. So here you are! We hope you find the installation instructions helpful. A lot of time went into creating them, feel free to email us with your comments!

1. What is included in a Laserjet 8100 / 8150 maintenance kit?
2. Fuser installation.
3. Transfer roller installation.
4. Tray 1 (Multi-purpose tray) pick-up roller and separation pad.
5. Cassette feed and pick-up rollers.
6. Reset the maintenance count.

Feed roller OEM (RF5-1834)
Two rollers per lower tray. If you don't have the optional 2000 sheet feeder you will have two extra rollers.