HP Color LaserJet CP5525 fuser installation instructions

Installing the fuser.

Turn the printer off and unplug the power cord. The fuser might be hot if you have been using the printer. As a safety precaution wait 20 minutes for the fuser to cool before proceeding.

Open the right side door.

Grasp the fuser handles while squeezing the 2 blue release levers (circled as callout 1 in picture below.)  Pull the fuser out away from the printer.

Install the new fuser in the same manner; make sure it is seated well, and then close the door. 

Remember to send your old fuser back to us (PrinterTechs) if you purchased your maintenance kit on exchange. Ship it back in the box we sent if you still have it.

On the next page you will reset the fuser page count.

• Next