• Email

HP LaserJet 5000 500-sheet optional cassette pickup roller , feed roller and separation roller installation instructions

Installing the 500-sheet optional cassette pickup roller and separation pad

Remove the printer from the 500 sheet lower cassette, this will make installation much easier. Remove the tray from the cassette and flip the cassette on its side. Remove the feed roller circled below by pinching the tab at the center of the roller and pulling it off the shaft. Replace it with a new roller.

Now replace the pickup rollers. Remove them by pressing on the locking tab circled below, rotate the shaft, and pull the roller straight off. Install the new rollers.

The separation rollers is replaced by opening the hinged door and pulling the roller off of the shaft.

• Prev
• Next