Printertechs.com, Inc. refurbished HP laserjets, laser printer parts and accessoriesrefurbished HP printers and laserjet  parts

HP Laserjet 5000 and 5100 Series Maintenance Kit Installation Instructions

Laserjet 5000 kit part number: C4110-69006, C4110-67914, C4110-67927
Laserjet 5100 kit part numbers: Q1860-67914, Q1860-67908, Q1860-67903, Q1860-67906

For HP laserjets 5000 and laserjet 5100 series printers, Hewlett Packard recommends the installation of a maintenance kit after every 150,000 pages printed. This is a rough estimate and you may need to install a maintenance kit far sooner than that depending on printing conditions and if the printer has been previously serviced with low quality aftermarket parts.

 To check prices or purchase an HP Laserjet 5000 maintenance kit click here or call us toll free 866-352-7108.
For HP Laserjet 5100 click here.

 

A picture is worth a thousand words...

It's a lot easier to show somebody how to install a maintenance kit than to tell them. After talking with hundreds of customers over the phone about installing printer maintenance kits we decided to write our own manuals. The instructions we found from Hewlett Packard and other sources were missing lots of information and often didn't contain any pictures. So here you are! We hope you find the installation instructions helpful. A lot of time went into creating them, feel free to email us with your comments!

 
Contents
  1. What is included in a Laserjet 5000 and 5100 maintenance kit?
  2. Fuser installation.
  3. Transfer roller installation.
  4. Tray 1 (Multi-purpose tray) pick-up roller and separation pad.
  5. 250 sheet tray pick-up rollers and separation pad.
  6. 500 sheet tray pick-up and separation rollers.
 
 What is included in a Laserjet 5000 and 5100 maintenance kit?
 
Qty. Description
1 HP laserjet 5000 or 5100 fuser (the fusers ARE different)
1 Transfer roller
1 Manual feed tray separation pad
1 Manual feed tray pick-up roller
1 Tray 2 (250 sheet tray) pickup roller
1 Tray 2 (250 sheet tray) separation pad O
4

500 sheet tray pick-up rollers

2 500 sheet tray feed and separation rollers

Note: All of our maintenance kits include Hewlett Packard (OEM) rollers, not cheap aftermarket rollers. This increases the cost of the kit but in the long run your parts will last longer and you will spend less time on expensive service calls. Click here for more information about aftermarket vs. OEM rollers.
 
 Images
 
  Description Qty in kit
HP laserjet 5000 or 5100 fuser (5100 and 5000 fusers are different)
1
Transfer roller
1
Manual feed tray separation pad
1
Manual feed tray pick-up roller
1
Tray 2 (250 sheet tray) pickup roller
1

Tray 2 (250 sheet tray) separation pad

1
500 sheet tray pick-up rollers
4
500 sheet tray feed and separation rollers
2

 

Products
Refurbished LaserJets
Maintenance Kits
Toner cartridges
Transfer Kits
Paper trays and cassettes
Duplexers
Envelope feeders
JetDirect Cards
Cables

Employment
Jobs

Tech Support
Main Support Page
Maintenance kit
Instructions
Manuals & Drivers
Print Defects
Repetitive defects Ruler
Error Codes
Service Mode
Clear Maint Count
Cold Reset Instr.

Tech Support Forum
Discussion Board

 

 

We buy fuser cores!
We are looking for used fusers. Click here for info.


 

 

 

     
608-831-2396
Home | Forum | Tech Support | About Us | Legal | Contact Us
 
© 2008 Printertechs.com, Inc.