608-831-2396 or 866-352-7108

HP LaserJet M4555 transfer roller installation instructions

purchase here

Installing the transfer roller.

Open the toner access door and remove the toner cartridge.

The transfer roller is the long black foam roller with a blue gear.

Carefully insert a flatblade screwdriver under the left-side metal shaft of the transfer roller (see picture), staying close to the blue gear. Lift the left end of transfer roller up, then slide the transfer roller to the left to remove it from the right collar.

When handling the replacement transfer roller be careful not to touch the black roller surface. Oils from your skin can adversely affect print quality. Some people recommend wearing latex gloves when handling the transfer roller but it isn't necessary if you are careful to only touch the ends. It is unlikely that you would ever notice poor print quality from accidentally touching the transfer roller's surface.

Insert the right end of the new transfer roller first. Follow with the left end, making sure the black plastic clip at the left end of the roller is oriented with the open end facing down. When the transfer roller is seated comfortably in its slot, press down on the black plastic clip to snap the clip in place.

Other Steps in HP LaserJet M4555

  1. HP LaserJet M4555 transfer roller installation instructions
  2. HP LaserJet M4555 fuser installation instructions
  3. HP LaserJet M4555 cassette feed and separation roller installation instructions