608-831-2396 or 866-352-7108

HP Color LaserJet CP3525 fuser installation instructions

purchase here

Installing the fuser.

Turn the printer off and unplug the power cord. The fuser might be hot if you have been using the printer. As a safety precaution wait 20 minutes for the fuser to cool before proceeding.

Open the right side cover (see picture below).

The fuser assembly has two blue handles (red arrows in picture below); hold those two handles as you pull the fuser straight out and remove it from the printer. 

Install the new fuser in the same manner; make sure it is seated well, and then close the door.  In the next step you will reset the fuser page count.

That's it for the fuser! Remember to send your old fuser back to us if you purchased your maintenance kit on exchange. Ship it back in the box we sent if you still have it.


Other Steps in HP LaserJet CP3525

  1. HP Color LaserJet CP3525 fuser installation instructions
  2. HP Color LaserJet CP3525 reset fuser page count instructions