50.7 Fuser Error HP LaserJet P4014 P4015 P4515
If you are experiencing a "50.7" fuser error, first turn the printer off and back on. Sometimes the error will temporarily go away with a reboot so you can print a few more pages, but usually the error reappears. If you recently moved the printer around or if you recently installed a new fuser, you can try removing the fuser, rotating the gears by hand (it's difficult!), and reseating the fuser to try again.
If you have NOT recently replaced the fuser or heavily jostled the printer around, then the 50.7 Fuser error indicates you have an actual fuser failure (the gearing pressure is not releasing) and the fuser needs replacing. Fusers are a consumable part and they are the main component in a printer maintenance kit; it is expected over the life of the printer you will replace the fuser / maintenance kit several times.
A fuser and maintenance kit can be easily replaced by an end user, without needing a service technician. Click here for installation instructions. Call us with any questions @ 608-831-2396 or toll-free 866-352-7108.