-
Home
-
Troubleshooting
-
Repetitive Defects Rulers
- HP LaserJet M601, M602, M603 print defects ruler
Repetitive Defects Ruler - HP LaserJet M601, M602, M603
The repetitive defects ruler can help pinpoint the cause of repeating defects. Measurement is taken from the first occurrence of the defect to the second occurrence.
Special note: Bad toner cartridges are the most frequent cause of print defects. As you examine the defect ruler, please note that the following components are internal to the toner cartridge: Primary Charging Roller, Developing cylinder or roller, Toner cartridge photosensitive drum. If these parts are identified as the problem, you will need to replace the toner cartridge.
Ruler for HP LaserJet M601, M602, M603
| Component | Distance between defects |
| Primary charging roller | 37.7 mm (1.5 inches) |
| Transfer roller | 47 mm (1.85 inches) |
| Developer roller | 63 mm (2.5 inches) |
| Tray 1 pickup roller | 63 mm (2.5 inches) |
| Tray 1 feed roller Tray 1 separation roller |
79 mm (3.1 inches) |
| Tray 2 feed roller Tray 2 pickup roller Tray 2 separation roller |
79 mm (3.1 inches) |
| Fuser sleeve unit or pressure roller | 94 mm (3.75 inches) |
| Photosensitive drum | 94 mm (3.75 inches) |
Tech Support
Featured Articles
