HP LaserJet 5100 500-sheet optional cassette pickup roller , feed roller and separation roller installation instructions
Installing the 500-sheet optional cassette pickup roller and separation pad
Remove the printer from the 500 sheet lower cassette, this will make installation much easier. Remove the tray from the cassette and flip the cassette on its side. Remove the feed roller circled below by pinching the tab at the center of the roller and pulling it off the shaft. Replace it with a new roller.
Now replace the pickup rollers. Remove them by pressing on the locking tab circled below, rotate the shaft, and pull the roller straight off. Install the new rollers.
The separation rollers is replaced by opening the hinged door and pulling the roller off of the shaft.
Other Steps in HP LaserJet 5100
- HP LaserJet 5100 fuser installation instructions
- HP LaserJet 5100 transfer roller installation instructions
- HP LaserJet 5100 Tray 1 pickup roller and separation pad installation instructions
- HP LaserJet 5100 250-sheet tray pickup roller and separation pad installation instructions
- HP LaserJet 5100 500-sheet optional cassette pickup roller , feed roller , and separation roller installation instructions
- HP LaserJet 5100 Reset maintenance count